10 Best Cheap Class D Amplifier
When it comes to buying Cheap Class D Amplifier, you will find many brands selling the same product. And this will make you confused because you will not know which one of these products will meet your needs and desires. That’s why we have compiled the 10 best Cheap Class D Amplifier considering a lot of factors such as price, quality, durability, customer satisfaction, and many more. Hope you will find the right product for you. Let’s check it now.
Best Cheap Class D Amplifier
Image
Product Title
Rating
7
8.1
Features
- Delivers up to 2.5 Watts into 4-8 ohm impedance speakers
- Very efficient Class-D controller amp
- Built in thermal and over-current protection
- Fixed 24dB gain, onboard trim potentiometer for adjusting input volume.
- Output is “Bridge Tied” meaning the output pins connect directly to the speaker pins, no connection to ground
Features
- POWER – MAX Power 1Ω：1x2200w @ 1ohm,MAX Power 2Ω：1x1400w @ 2ohm;RMS Power：1x900w @ 1ohm, RMS Power：1x600w @ 2ohm. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
- CLASS D – Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
- 1 Ohm STABLE – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to.
- VARIABLE SUBSONIC FILTER WITH LOW-PASS CROSSOVER – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion. Reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
- WARRANTY – As long as you purchase through Amazon.com, LEIGESAUDIO provide a comprehensive 3-year VIP online reseller warranty. We strongly encourage professional installation methods to ensure excellent performance and safe functions of this product.
Features
- 1600W Maximum Power Full-Range Amplifier With Bluetooth
- Optimized 150-watt RMS output and a max power output of 1600 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
- Amplifier Class D 4/3/2 Channel Max. Output Power: 1600W x 4 RMS Power (4 Ohms) 100W x 4 RMS Power (2 Ohms): 150W x 4
- Frequency Response: 10Hz – 30Hz Signal-To- Noise Ratio: =>90dB Voltage Supply: 11 – 15V DC Gain Adjust: 250mV-6V Dimension: 6.7″ x 3.8″ x 1.8″
Features
- Super mini volume: 1.85 x 2.11 cm.Can be easily placed in a variety of digital products within a small space, high efficiency amplification
- Dual-channel stereo, 5V power supply can output 3W +3 W power, can be directly driven 4Ω, 8Ω small speakers, the output power, enough energy, good sound quality.
- Excellent noise suppression, no audio input in the case of ear close to the speaker can not hear any noise.
- The unique Class D digital powerless board with LC filter can be powered directly from the computer’s USB.
- Double-panel wiring, properly solve the wiring caused by the potential balance and crosstalk between channels
Features
- Power – 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
- Class D – Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
- 1 Ohm Stable – Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
- Strapping Capable – You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
- Variable Subsonic Filter – To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
Features
- ❶ This AIYIMA A07 power amplifier adopt the TPA3255D2 amp chip and NE5532 op-amp chip.Very Quiet, Runs Extremely Cool,Easy to set up.It’s a nice mini audio component amplifiers for Home Audio stereo system
- ❷ 300W+300W HiFi integrated class D amplifier, Exclusively designed for the customers who pursue HiFi sound,High efficient max power output up to 300 Watt
- ❸ Two input ways:3.5mm AUX Audio input/ RCA Audio input（3.5mm interface is also Aux Audio output interface(3.5mm AUX sed as audio output can go to connect any Powered device: Speakers, Amplifier,Active Subwoofer ect.).More detail connection and use ways,pls see the main picture shown)
- ❹ Simple compact design,And the exterior design is delicate and beautiful little amp,It can match with your computer/ desktop /Home theatre system and so on;A computer, an tube preamp(TUBE A3 PRO / T7 / T8), matched with our A07 home speaker amplifier, connected to your home audio passive speakers to form a perfect HIFI system, allowing you to liberate your ears in this noisy city
- ❺ Package with a DC 32V 5A Power Adapter for free,But if you want to get the maximum power of 300W, you need to buy a power adapter that uses DC 48V and current is above 7A(Cannot use industrial power supply,and please choose the correct passive speaker power to use ).
Features
- 2,000 watts mono bridged x 1 @ 4 ohms
- 500 watts x 1 @ 4 ohms
- 1,000 watts x 1 @ 2 ohms
- 0 to 12 dB bass boost
- Road Worthy TCID (Twin Coil Isolation Design) and Pro-Fi High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
Features
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor – 150
- Stable at 1 ohm | Remote Subwoofer Level Control Included
Features
- QUALITY – This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others.
- 1 Ohm Stable – This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively.
- Low/High Level Inputs – The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- Features – The monoblock bass boost amplifier has features like – Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift
- Power – This Class D 3000 watt Amplifier has a power rating distribution as followed 3000 X 1 MAX @ 1 OHM. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
Features
- Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier. Full-Range Class D Amplifier Architecture. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N. 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD. 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD.
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged. Fully marine grade amplifier with conformal-coated PCB board. Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more.
- Double Sided Surface Mount (SMD) PCB Design. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. Status Mode LED Indicator.
- 8 Volt Preamp Circuitry. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. Fully Adjustable 12dB / Octave Crossover. Low Pass 50Hz – 250Hz. High Pass 50Hz – 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. Minimum THD at Rated Power: < 0.05%.
- Frequency Response: 15Hz – 20KHz. S / N Ratio: 100dB. S/N Ratio: >97dB. Damping Factor: > 200 @ 100Hz. 3 x 35 Amp Fuses. Dimensions: (W x H x L) 6.7″ x 1.98″ x 12.25″
Final Words
So, these are all of the Best Cheap Class D Amplifier available on the market. We hope this collection was helpful to find the right Cheap Class D Amplifier for the money. However, we recommend checking out the features, benefits, and problems of each of these Cheap Class D Amplifier before taking your decision.
