10 Best Bluetooth Amplifier Board
When it comes to buying Bluetooth Amplifier Board, you will find many brands selling the same product. And this will make you confused because you will not know which one of these products will meet your needs and desires. That’s why we have compiled the 10 best Bluetooth Amplifier Board considering a lot of factors such as price, quality, durability, customer satisfaction, and many more. Hope you will find the right product for you. Let’s check it now.
Best Bluetooth Amplifier Board
Image
Product Title
Rating
Features
- [2-in-1] High quality power amplifier board. With AUX and Blue tooth two audio input methods, 2-in-1. 5.0 Bluetooth version, the transmission efficiency is higher, the transmission distance is farther
- [High Performance] Blue tooth audio amplifier module 2.1 channel, Max output power 2X50W+100W. With antenna and antenna base, the signal is better, the efficiency is high, and the anti-interference ability is strong
- [Protection Mechanism] With short-circuit protection as well as overcurrent, overheating, and anti reverse connection protection to prevent total failure. In the event of an overload, the device reports the fault condition to the processor to protect itself from damage
- [High Quality] It adopts copper DC connector and fence type terminal. It can withstand large current, no heat, no damage to the wire. Free DC head lead, compatible with the input power interface of this product, even if you don’t have a DC head adapter or battery, it can be easily wired
- [Application] With bass, treble, subwoofer frequency and volume control, easy to adjust volume, enjoy the music tone what you want. Widely used in store solicitation, home theater, square speakers, etc
Features
- DUAL TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 12-24V;
- Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.；
- BT and AUX Function: BT 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have BT, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.；
- Safety Protection: This Amp Board Has Overheat Protection, Circuit Protection, Over-voltage and Under-voltage Protection；
- 7 * 24 Hours After-sales Service: Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer.
Features
- [Blue tooth amplifier] High quality mini amplifier board. Bluetooth 5.0 version, the transmission efficiency is higher, the transmission distance is farther
- [High Performance] Audio power amplifier module dual channel, max output power 2X50W. The capacitor 470uf35V guarantees the power storage and heat dissipation capacity, makes the power supply stable, and is equipped with a heatsink
- [Protection Mechanism] With short-circuit protection and overheating protection to prevent total failure. In the event of an overload, the device reports the fault condition to the processor to protect itself from damage
- [High Quality] It adopts copper DC connector and fence type terminal. It can withstand large current, no heat, no damage to the wire. Free DC head lead, compatible with the input power interface of this product, even if you don’t have a DC head adapter or battery, it can be easily wired
- [Application] The potentiometer adjusts the volume with a switch for easy control of the volume, making it ideal for DIY speakers. Widely used in car, home theater etc
Features
- 【Bluetooth & 3.5mm AUX】 The ZK-MT21 power amplifier board uses Bluetooth 5.0, and its transmission distance can reach 49 feet (without obstruction). At the same time, this power amplifier board has a 3.5mm AUX audio input interface. No matter what kind of input method, you can always find a method that suits you.
- 【Treble and bass adjustment】If you are tired of power amplifiers with only a single volume knob, then you feel right, because you have further requirements for audio. By adjusting the high and low frequency knobs of ZK-MT21, you can make the sound more layered and make the bass more shocking.
- 【High compatibility】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-MT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product.
- 【Protection function】ZK-MT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports the fault condition to the processor to protect itself from damage
- 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer
Features
- 【Perfect HIFI Sound】Adopt TPA3116D2(with AM interference suppression function) chip, with excellent sound quality. It ensures that even with high power operation for a long time, THD is less than 0.1%.
- 【Mini but Powerful】2 CH stereo output power 50watt * 2, working voltage range DC5-27V, for 4-8Ω, 50watt-200watt passive speakers.
- 【Two Input Modes】This amplifier board supports 3.5mm wired input and Bluetooth 5.0 input. Bluetooth signal distance up to 49ft. With volume control and power switch, Ideal for DIY your passive speakers.
- 【Ensure Safety】This Bluetooth amplifier board has a bottom plate and a top plate, support reverse connection protection, Over-voltage protection, under-voltage protection, Over-heat protection, Short-circuit protection.
- 【Warranty】18 months warranty and lifetime technical support. If you have any questions, please feel free to contact us.
Features
- 【TDA7498E HIFI CHIP】The TDA7498E Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, Wide Voltage Input DC: 15-36V,This power amplifier board uses two TDA7498E high-fidelity maximum output power up to 160W*2+220W.
- 【TREBLE & BASS CONTROL】If you are tired of an amplifier with only one volume knob, then you feel right, because you have further requirements for audio. By adjusting the high and low frequency knobs of the ZK-HT21 power amplifier board, you can make the sound more layered and make the bass more shocking.
- 【HIGH COMPATIBILITY】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-HT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product.
- 【PROTECTION FUNCTION】ZK-HT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports the fault condition to the processor to protect itself from damage
- 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer
Features
- CHIP: DUAL TPA3116 HIFI Chip with AM Interference Suppression Function, 100W*2 Output Power
- WIDE INPUT VOLTAGE RANGE: DC 9V-24V with 5.5 * 2.1mm Interface, Laptop Power Supply Is a Good Choice
- BLUETOOTH & AUX INPUT:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the 3.5MM Headphone (Line in) Way
- PROTECTIVE FUNCTION:Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection, This means that the Bluetooth amplifier board is not easily damaged
- TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!
Features
- 【TDA7498E HIFI CHIP】The TDA7498E Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, Wide Voltage Input DC: 15-36V,This power amplifier board uses a TDA7498E high-fidelity maximum output power up to 160W*2
- 【TREBLE & BASS CONTROL】If you are tired of an amplifier with only one volume knob, then you feel right, because you have further requirements for audio. By adjusting the high and low frequency knobs of this power amplifier board, you can make the sound more layered and make the bass more shocking.
- 【HIGH COMPATIBILITY】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-1602T BT power amplifier board.
- 【PROTECTION FUNCTION】ZK-1602T BT power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports the fault condition to the processor to protect itself from damage
- 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer
Features
- Output Power: 100w+100w Output Power, Wide Voltage Input: 5V-24V, Can Be Powered by 9V/12V/15V/19V/24V. Adapter speaker 4-8Ω (50w-150w)
- Bluetooth 5.0: User Can Directly Connect with Wireless Bluetooth 5.0 without Password
- Easy Installation and Short Start-up Sound: The Illustration Of Each Interface Is Printed On The Protective Plate, Making It Easy To Install Even Without Instructions. The Sound of The Amp Board To Start And Connect To Bluetooth Is Short Rather Than Not a Asian Woman’s voice.
- Protective Function:This BT Amp Is Designed with Protective Case, Over-heat Protection, Short-circuit Protection
- Note: Please Use A Power Adapter With Sufficient Power To Connect The Amp Board, Otherwise The Sound Will Be Distorted. And Make Sure The AMP Board Is Away From The Wifi Signal.
Features
- HIFI CHIP：ZK-502C Adopt TPA3116D2(with AM Interference Suppression Function) Chips, With Excellent Sound Quality. It Ensures That Even With High Power Operation For A Long Time, THD Is Less Than 0.1%
- WIDE INPUT VOLTAGE: DC 9V-24V, Can Be Powered by 9V/12V/15V/18V/24V
- TWO AUDIO INPUT WAYS:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the Headphone (Line in) Way
- PROTECTIVE FUNCTION:This BT Amp Is Designed with Protective Case, Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection
- TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance of the speaker will have different output power.In the case of sufficient voltage and current, the larger the impedance of speaker, the smaller the relative sound power, please pay attention!
Final Words
So, these are all of the Best Bluetooth Amplifier Board available on the market. We hope this collection was helpful to find the right Bluetooth Amplifier Board for the money. However, we recommend checking out the features, benefits, and problems of each of these Bluetooth Amplifier Board before taking your decision.
